Fischer & Krecke CI flexo printer model FP 15S 8, year 2010

Brand: Fischer & Krecke
Model: FP 15S-8
Year: 2010
8 colors
Type: Central drum, gearless
Maximum material width: 1300 mm
Maximum printing width: 1250 mm
Print repeat: 320–880 mm
Min 320 mm with steel shafts Ø89.293 mm
Max 880 mm with sleeve adapter
Mechanical speed: 400 m/min
Controls and registration:
Front/back reprinting with register control
Longitudinal and transversal register control
Printing unit positioning: manual (automatic to be restored)
Plate shaft calibration: Hydraulic Fischer system
GPS plate mounter 2011 with RFID read/write, pressure sensors, and angular division software
P2P system for automatic pressure (to be reactivated)
Printable materials:PE: 25–150 µm BOPP: 12–50 µm PET: 10–70 µm BOPA: 15–50 µm PA: 15–50 µm, Metallized films: 12–70 µm, Paper: 30–120 g/m²
Inks: Solvent-based
Printing system:Motorized central drum, printing cylinders, and anilox
Chiller for central drum (18 kW, independent unit)
Inking system: single-pump per color, highly reliable, no ghosting effect
8 Yamada 1¼" pneumatic diaphragm pumps (1 per color + wash)
1 pump for viscosimeters
2 pumps for wash drainage
Doctor blade: double-chamber system (closed)
Drying and heating:
Intercolor drawers + tunnel
Heating: LPG gas
Hot air recirculation (manual setting ~50%)
Unwinder and Rewinder:
Face-to-face configuration
Type: Revolver
Maximum coil diameter: Ø1020 mm
Expandable shafts:
Unwinder: 4 × 6", 2 × 3"
Rewinder: 2 × 3", 4 × 6"
Web tension:
Unwinder: 25–250 N
Rewinder: 35–350 N
Sleeves and plates:
8 anilox sleeves Ø162 mm × 510 mm
80 cliché sleeves
10 Rossini sleeves (1285 mm print width), incl. 8 nearly new 880 mm format
Adapters for plate mounters Ø117 mm and Ø159 mm
Capability for continuous rubber sleeves without slippage
Additional features:
2 BST web guides for 100% inspection
BST matrix video system
Motorized Corona treatment
Edge guide system
LED bar for lighting printing units
Fasnacht viscometers (revised 2025)
Explosion proof (LEL sensor)
Offset adjustment of the printing step in shortening/elongation (more than 1% of sleeve repeat)
Motorized longitudinal register: longitudinal and transverse
Ability to work with sleeves of different repeats simultaneously
Power and utilities:Power supply: 400 V, 50 Hz, 3-phase, 250 KVA, 360 A, Compressed air supply: 6 bar
Certification: CE
Cleaned and partially re-painted in October 2025
Visible in production
Availability: November 2025