002 - Raspberry Pi Rack #2 - The Mid-Rack
Автор: Doug Meek
Загружено: 2021-09-18
Просмотров: 434
Welcome to my channel. This is the second video in a series about my Raspberry Pi server rack.
If you're new to this series, I suggest you start with video 1: • 001- Raspberry Pi Rack #1 - Introduction &...
I've been designing an enclosure for my Raspberry Pi Kubernetes cluster running K3s and Rancher. This is the result of roughly 400 hours of design in Fusion 360. Over the next few weeks to months I'll be releasing parts as I print and test them for fit and finish. I hope you'll come along for the ride by printing your own enclosure with the series. I can't wait to see what you come up with.
I'll be adding the parts for this build here: https://www.prusaprinters.org/prints/...
Hardware parts list for the next few videos:
4 x M2.5x10 bolts (I prefer stainless)
4 x 20mm x 6mm x 2mm magnets for the top
4 x 20mm x 6mm x 2mm magnets per section of the rack
4 x 6mm x 2mm (6mm x 1.75mm actual) magnets per blade (what I used: https://www.amazon.com/gp/product/B07...)
Printer: Prusa MK3S MMU2S
Filament: Prusament Galaxy Silver
Slicer: PrusaSlicer
Layer Height: 0.2mm
Nozzle Size: 0.4mm
Infill: 15% Gyroid
Join my Discord server on the 'ABOUT' page of my channel to post progress of your builds and discuss ideas.
Доступные форматы для скачивания:
Скачать видео mp4
-
Информация по загрузке:
