How to Replace Front Upper Control Arms 2008-2013 Infiniti G37

Buy Now!
New Control Arm with Ball Joint Set from 1AAuto.com https://trq.video/ia-1ASFK08282
New Control Arm with Ball Joint from 1AAuto.com https://trq.video/ia-1ASFU00338
New Control Arm with Ball Joint from 1AAuto.com https://trq.video/ia-1ASFU00339

This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2008-2013 Infiniti G37. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.

Estimated installation time for a professional technician is approximately: 1 hour 36 minutes

This repair was done on a 2010 INFINITI G37 X 3.7L Sedan 4-Door AWD Automatic and the process should be similar on the following vehicles:
2008 INFINITI G37
2009 INFINITI G37
2010 INFINITI G37
2011 INFINITI G37
2012 INFINITI G37
2013 INFINITI G37

Tools you will need:
• 14mm Wrench
• 14mm Socket
• 21mm Socket
• Ratchet
• Socket Extensions
• Torque Wrench https://trq.video/obGp-1AXAA00044
• Bungee Cord
• Gloves https://trq.video/obYd-1AXSS00048
• Safety Glasses
• Floor Jack
• Jack Stands
• Pole Jack
• Rubber Mallet
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Infiniti G37 4th Generation 2008-2013:    • Infiniti G37 4th Generation 2008-2013  

📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.