Wurth Quick Seam Sealer

Wurth Quick Seam Sealer: Permanently flexible, durable sealer / adhesive

Features:
• Highly weather-resistant
• Moisture cure
• Paintable
• Will not peel crack or shrink
• Contains no solvents or isocyanates and is non-yellowing
• Does not require application gun

Applications:
Exhibits excellent adhesive properties to substrates that include aluminum, brass, steel, glass, mortar, concrete, wood and many plastics. Cured product may be painted with most industrial and consumer paints. Testing prior to painting is recommended.

Power Can Dispensing Instructions:
1. Make sure the surface is clean and dry, then snap off the tamper proof tab from the nozzle. Remove overcap before dispensing.
2. To open, turn nozzle counterclockwise for a quarter of a turn, this will open the valve and raise the lever. When finished, turn nozzle clockwise, which will close lever in original position. Replace overcap.
3. If sealant has dried up in nozzle, with nozzle in close position, swing lever over nozzle. Pull nozzle forward to remove. Clean nozzle tip with paper clip or compressed air line.
4. Relocate nozzle back over valve, with the two thick plastic fins pointing to the back hinge and front of lever. Swing lever back over nozzle to original position, slightly press the nozzle backwards towards the hinge. Use lever to firmly “click” nozzle back in position.

WarningThis product can expose you chemicals including Di-isononyl phthalate, which is known to the State of California to cause cancer, and Bis(2-propylheptyl)phthalate, which is known to the State of California to cause birth defects or other reproductive harm.
For more information go to: https://www.p65warnings.ca.gov/