Installing a Front Mount Intercooler on my vrs !/(Hindi)

What is up boys how are you guys doing !
Today in the video i install a front mount intercooler and 2.5 inch piping as well on my mk1 vrs 1.8 20vt .
Installing a front mount intercooler is a pretty staright forward job , you need to take of your front bumper ( https://remont-bampera.com/en/skoda-o...) and take off the old piping and depending on your kit you might as well need to trim the stock bumper a little .

Stock side mount intercooler on 1.8t is a very big restriction if you are chasing for good power out of your stock engine as at Stage 2 your stock k03s is working hard to provide you all that delicious 20 plus psi of boost and the stock intercooler is going to create a bottle neck in your air flow to the engine , also the cooler core being so tiny the heat soak is going to effect the performance a lot , and keeping the cooler core aside the stock IC piping is also a very huge restriction as it doesn't flow well as it has a lot of sharp bends and a pancake pipe which squeezes the stock 2 inch piping to hardly 0.5 inch thick. So upgrading the cooler and the stock 2 inch piping to 2.5 is recommended to get the most out of your stock k03s.

No links sadly for the IC used on the car as both the listings expired

Any doubts ? leave it in the comment section and if you enjoyed make sure to leave a like and if you are not already subscribed consider subscribing !

MUSIC ‪@HomageBeats‬
INSTAGRAM @thatguywiththebluehyundai