How To Setup Cellular Failover On Your Home Network (Using TP-Link Gear)

Today, I finally finished setting up my home network in a way that is optimized for automatic failover onto 4G cellular connectivity. After some experimentation, I finally worked out how to get my TP-Link cellular router (TL-MR 100) to feed its connectivity into my TP-Link load balancer (R470T+). (Make sure to assign an IP to the cellular router that's outside the IP address range of the LAN devices that the main router is neworking / in a different subnet).

The ISP line goes into the load balancer too. And then there's a WiFi access point downstream. Everything is working great and the failover time from ISP to cellular is now less than 2 seconds - compared to 20-30 seconds when doing failover just on the cellular router (with ISP pass-through connectivity).

Two corrections:

The upstream router needs to have an assigned IP that is a different subnet to the LAN / DHCP server. Therefore it needs to be OUTSIDE the range on the LAN.

Secondly the failover time isn't quite as rosey as I thought. On repeated testing I'm getting more like 30/30.

To open source the 'how to' for this project, here's the 'documentation' describing exactly how I set this all up:

https://danielrosehill.medium.com/how...

By: Daniel Rosehill (danielrosehill.com):

Want to help the channel keep growing?

Here's my Amazon video wishlist!

https://www.amazon.com/hz/wishlist/ls...

== Contact Information ===

For latest contact information:

   / danielrosehillvideo  

== Licensing / syndication / reproduction ==

Unless otherwise indicated, all videos I distribute through YouTube are licensed under the following Creative Commons license: Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0).

For the full license, see: https://bit.ly/ncnd4bycc.

== Production notes ==*

Camera:
Audio:
Stabilization:
Lighting:
Postproduction:
Other notes:

(I write these for myself to help keep track of what equipment I'm using as I try to make better YouTube videos!)