#RoofSeal

Previous main Video Link
   • #Home Cooling Treatment #Cool Coat On Roo ...  

This is a review video of previous episode.
In this video we showed you how to keep your home cool in summer at very low cost using Dr. Fixit RoofSeal Classic. This is very easy to apply in your roof, no need any expert. This material not only keep cool your home, even it works as a very good damp proof.
Please see the full video to know how to apply in your roof without any experience.
What is the use of Dr. Fixit Roofseal?
Dr. Fixit Roofseal is a single component cold applied elastomeric waterproofing coating based on synthetic resin emulsion. It is a tough yet extremely flexible coating that can be efficiently applied by roller or squeegee. Waterproofing of flat concrete roofs.
How do I use Dr Fixit on Terrace?
How to use Dr Fixit waterproofing for terrace: Step by step guide
Chip off the top layer at least 10-15mm. Sweep the dust and water the portion.
Prepare cement slurry with Dr Fixit.
You have to make the concrete by mixing cement: sand: 10mm aggregate in a 1:1.5:3 ratio. ...
Allow the retain as ponding for at least 10 days.
How much area does Dr. Fixit Roofseal cover?
Fixit Roofseal Classic @ 2.0 - 2.2 Sq. mtr / litre / coat, with the same application coverage. Application direction of second coat should be perpendicular to that of the first coat without water dilution to deliver a DFT of 450– 500 microns. Allow the system to air cure for 7 days minimum.
How do you mix Dr Fixit in water?
Start addition of 75–80% mixing water & mix for 2-3 minutes. Add Dr. Fixit WP Admix 1litre per 100 kg cement into the remaining mixing / gauging water, then add to concrete mixer & mix for another 2 minutes. Place the concrete or apply plaster, as needed.
Which Waterproofing is Best for Terraces?
Liquid-Applied Waterproofing Membranes. This popular choice offers ease of application and versatility. ...
Sheet Membranes. ...
Acrylic Cementitious Waterproofing Coatings. ...
Epoxy Waterproofing.
How to stop terrace leakage?
To stop terrace leakage, focus on waterproofing by applying a protective layer or coating to prevent water seepage, and ensure proper drainage and regular maintenance to prevent future issues.
Roof sealing cost in 2024 is between $7 and $54 per square meter depending on the type of sealant and condition of the roof. For example a 160 square meter roof can cost between $1,100 and $8,500. These costs include materials which are between $2 and $27 per square meter. Acrylic is the most affordable option
Which Dr. Fixit is best for waterproofing?
Dr. Fixit Pidifin 2K is applied to waterproof and protect concrete and masonry substrates. Dr. Fixit Raincoat WPC is used as a waterproof coating on existing and new surfaces.
How does roofseal work?
Fixit Roofseal Classic is a single component, insulating elastomeric waterproof coating for roofs that offers a seal against water and heat. Dr. Fixit Roofseal Top Coat is based on PU - Acrylic hybrid emulsion technology reinforced with nano fibers.
What is the mixing ratio for waterproofing?
AI Overview
For effective waterproofing, a common cement-to-sand ratio is 1:4, and a water-to-cement ratio should ideally be below 0.5, aiming for a dense, low-porosity mix.
Here's a more detailed breakdown:
Cement to Sand Ratio:
A typical mix for waterproofing is 1 part cement to 4 parts sand.
Water to Cement Ratio:
Aim for a water-to-cement ratio of 0.4 or less to achieve a dense, watertight mix.
Waterproofing Additives:
Consider using waterproofing additives or admixtures, such as Sika-1 or Dr. Fixit WP Admix, to enhance performance and reduce shrinkage.
Mixing:
Add water to the mixing container while the mixer is running.
Add the waterproofing mortar mix thoroughly to achieve a homogeneous consistency.
Allow the material to rest undisturbed for 2-3 minutes, then remix.
Application:
Apply the waterproofing mortar with a trowel, brush, or roller, ensuring a minimum thickness of 5-8mm.
Work the first coat into the substrate to fill voids and cracks.
Apply a second coat after the first coat is dry, approximately 4-6 hours later.
Curing:
Ensure the waterproofed area is kept moist for an extended period during the setting process to prevent "burning out" and loss of waterproofing ability.
Specific Product Instructions:
Always follow the manufacturer's recommendations for the specific waterproofing product being used.
This video demonstrates how to mix and apply waterproofing cement:

59s


CTSRapidSet
YouTube · 10 Aug 2020
Generative AI is experimental. Learn more
Waterproofing cement: What it is and how to mix it - RUBI
22 Jul 2024 — Being 1 part waterproofing to 10 parts water. If this ratio (1:10) is not respected, we can have moisture problems in t...

RUBI
Dr. Fixit 302 Super Latex: High-Performance Waterproofing ...
waterproofing and as a bond coat. * Mix Super Latex, Water, Cement in the ratio 1 : 4 : 7. * Brush apply the 1st coat. * Apply 2n...