How to change shock absorbers on a SUZUKI SWIFT 3 – problem-solving [TUTORIAL AUTODOC]

How to change shock absorber on SUZUKI SWIFT 3 (MZ, EZ) Hatchback 2005-2018 [TUTORIAL AUTODOC]

📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App — https://interstitials.onelink.me/1036...

🛒 Products you'll need for the job:
Shock absorber for SUZUKI SWIFT 3: https://www.autodoc.co.uk/car-parts/s...

⚡ Add your car to the AUTODOC CLUB garage and get personal recommendations on repair intervals — https://club.autodoc.co.uk/?to=/user/...

00:00 — SUZUKI SWIFT 3 – front shock absorber replacement: step-by-step tutorial
00:26 — Use a combination spanner No.16 and a drive socket No.15 to unscrew the upper fastening of the stabiliser link
00:43 — Use a drive socket No.12 and a ratchet wrench to disconnect the brake hose holder from the shock absorber strut
00:58 — Use a flat screwdriver to disconnect the ABS sensor cable fastener
01:04 — Use a combination spanner No.17 and drive socket No.21 to unscrew the lower fastener of the shock absorber strut
01:32 — Disconnect the steering knuckle from the shock absorber strut
01:47 — Use a flat screwdriver to unscrew the fixing bolts of the protective cover
02:14 — Use a combination spanner No.18 and a HEX bit No.H6 to unscrew the top fastening of the shock strut mount
02:59 — Use a combination spanner No.17 and a HEX bit No.H6 to unscrew the top fastening of the shock strut amount
03:36 — Before installing a new shock absorber, you should pump it manually 3–5 times
04:27 — Use a combination spanner No.17 and a HEX bit No.H6 to screw the top fastening of the shock strut mount
04:50 — Tighten the shock strut top mount. Use a combination spanner No.18 and a HEX bit No.H6
04:57 — Install the protective cap onto the shock absorber strut mount
05:10 — Tighten the fixing bolts of the protective cover
05:30 — Install the steering knuckle on the shock strut and tighten it. Use a combination spanner No.17 and a drive socket No.21
05:58 — Connect the brake hose fastener to the shock absorber strut. Use a drive socket No.12 and a ratchet wrench
06:09 — Connect the ABS sensor cable fastener
06:16 — Tighten the upper fastening of the stabiliser link. Use a combination spanner No.16 and a drive socket No.15

Have a look at other videos on our channel:
► SUZUKI SWIFT 3 car repair tutorial —    • SUZUKI SWIFT 3 car repair tutorial | Step-...  
► How to replace front brake discs and front brake pads set on SUZUKI SWIFT 3 —    • How to change front brake discs and front ...  
► How to replace oil filter and engine oil on SUZUKI SWIFT 3 Hatchback —    • How to change oil filter and engine oil on...  

#autodoc #autoparts #carrepair

Disclaimer:
This video is intended for informational purposes only and does not guarantee achievement of a specific result.

It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.

This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements that are a result of incorrect use or misinterpretation of the provided information. The user is personally liable for incorrect use of repair equipment, tools, or car parts, in particular when this use poses the risk of injury. AUTODOC strongly recommends taking appropriate safety precautions when carrying out any repair or replacement. Keep in mind that low-quality auto parts may not provide the appropriate level of road safety.