MI 9T K20 BASEBAND UNKNOWN/NO SIM CARD NO NETWORK/ NULL FIX/ SOLUTION FREE ALL FILE

Samsung j210f | No Service Problem | Network Up Down No Service | Network Solution 1000%
   • Samsung j210f | No Service Problem | Netwo...   -~-
MI 9T K20 BASEBAND UNKNOWN/NO SIM CARD NO NETWORK/ NULL FIX/ SOLUTION FREE ALL FILE
PASSWORD=SOLUTION VIDEOS
DOWNLOAD ENG FILE---https://androidfilehost.com/?fid=1566...
DOWNLOAD ENG QCN--https://androidfilehost.com/?fid=1566...
DOWNLOAD FULL FILE---https://xiaomirom.com/en/download/red...

Reset EFS Partition:

adb shell
su
dd if=/dev/zero of=/dev/block/sdf6
dd if=/dev/zero of=/dev/block/sdf7
dd if=/dev/zero of=/dev/block/sde33
reboot

Enable Diag Port:

adb shell
su
setprop sys.usb.config rndis,diag,adb





Welcome to 🆂🅾🅻🆄🆃🅸🅾🅽 🆅🅸🅳🅴🅾🆂
এই সাইটের প্রতিটি ফাইল ফ্রী।সাবস্ক্রাইব করে সাথেই থাকুন
Every file on this site is free. Stay tuned by subscribing
চ্যানেলে সাবস্ক্রাইব করুন এবং সর্বশেষ আপডেটের জন্য বেল আইকন টিপুন
আমার সাথে যোগাযোগ করার মাধ্যম
Page:   / dulal113  
Perosnal id:   / dkdulal19  

Subscribe 🆂🅾🅻🆄🆃🅸🅾🅽&🆅🅸🅳🅴🅾🆂 : https://www.youtube.com/c/SOLUTIONVID...
●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
1. Intro [00:00]
2. Boot the Xiaomi Redmi smartphone into Fastboot Mode [01:40]
3. Download/extract the MIUI firmware that matches your device/model/codename. [02:46]
4. Connect the smartphone to the PC with a USB cable.
5. Put those firmware files into your ADB/Fastboot folder. [03:42]
6. Open up a Command Prompt/PowerShell, or Terminal window [04:30]
7. And execute the flash_all.bat file as shown [05:09]
8. Wait for the batch script to complete [08:25]
9. Then the smartphone should reboot on its own [09:02]
10. Activate Android like normal [11:00]
11. Then compete the setup to fix the bootloop [12:43]

Mobile hardware and software solution
●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
ʟɪᴋᴇ | sᴜʙsᴄʀɪʙᴇ | sʜᴀʀᴇ | ᴄᴏᴍᴍᴇɴᴛ
●▬▬▬▬▬▬▬▬▬ஜ۩۞۩ஜ▬▬▬▬▬▬▬▬▬●