How to Replace Rear Windshield Wiper Arm 2002-2009 Chevrolet Trailblazer

Shop for New Auto Parts at 1AAuto.com https://trq.video/c-24-cc

This video shows you how to install a new rear wiper arm on your 2002-2009 Chevrolet Trailblazer. If your rear wiper arm is broken, or stripped out, you can replace it with a new one from TRQ yourself.

This repair was done on a 2007 Chevrolet Trailblazer LT 4.2L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2002 Chevrolet Trailblazer
2003 Chevrolet Trailblazer
2004 Chevrolet Trailblazer
2005 Chevrolet Trailblazer
2006 Chevrolet Trailblazer
2007 Chevrolet Trailblazer
2008 Chevrolet Trailblazer
2009 Chevrolet Trailblazer

Tools you will need:
• 13mm Socket https://trq.video/obIN-1AXAA00015
• Trim Tool Set https://trq.video/oajp-1AXXX00006
• Ratchet https://trq.video/obMm-1AXAA00016
• Socket Extensions https://trq.video/obIN-1AXAA00015
• Torque Wrench https://trq.video/oaRf-1AXAA00044
• Gloves https://trq.video/oat2-1AXSS00048
• Paper Towels https://trq.video/oGv-1AXSS00035
• Rust Penetrant
• Safety Glasses
• Pick https://trq.video/oTL-1AXAA00037

Subscribe:    / @trq  

Check out our playlist:
Chevy Trailblazer 2002-2009 1st Generation:    • Chevy Trailblazer 2002-2009 1st Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.