[F&P] - Heavy 60 with ActiveIntelligence

This is the Heavy programme (I like this one a lot)
It's designed for big items like Bedding and Towels, bulky or heavy duty clothing and heavily soiled washes of mixed fabrics. A great contrast to the Mixed cycle which is a short, cool cycle for lightly soiled items to be washed in under an hour. So far I've seen the cycle run between 1h:25 and 2h:15 depending on various load and soil factors. I usually takes about 1h:50 and everything comes out brilliantly white and spotless. (no 3 hour cycles here)

It uses a high water level for deep cleaning, and temperature holds for the whole wash as standard. It runs a cool down followed by 3 very deep, short rinses with 1100rpm interm spins and a 1400 final spin. The rinsing and spinning is carried out in about 40mins. I like that the tumble action isn't super intensive so you can throw in mixed fabrics and get a deep thorough clean without agressive tumbling and wear and tear.

Hope you enjoy this video.

Find me on insta 📸  / machinecentral  

0:00:00 - Loading and programming
0:00:30 - Start / Load Sensing
0:01:12 - Filling / Soil Sensing
0:02:49 - Heater on / Mixing in detergent
0:04:00 - Reading baseline turbidity
0:04:09 - Tumbling
0:05:14 - Reading change in turbidity
0:05:21 - Soil detected and cycle optimised
0:05:26 - Adding additional detergent
0:09:05 - Vortex wash
0:10:14 - Temperature held main wash
0:12:53 - End of wash, change of tumbles. Foam suppression
0:13:33 - Cool down
0:16:36 - Interm spin 1100rpm
0:22:48 - Rinse 1 and spin
0:26:14 - Rinse 2 and spin
0:29:07 - Adding Softener
0:30:24 - Rinse 3
0:32:46 - Final spin 1400rpm
0:34:48 - Tumbling