3 Phase Motor Connection | Star Delta Connection | Induction Motor Connection

3 Phase Motor Connection | Star Delta Connection | 3 Phase Induction Motor | How to check with Multi-meter | 2019
Star delta connection, motor connection, स्टार डेल्टा मोटर कनेक्शन,
In this video you will learn about 3 Phase induction motor connection.Construction of induction motors.The stator frame consists of laminations of silicon steel, usually with a thickness of about 0.5 millimetre. Lamination is necessary since a voltage is induced along the axial length of the steel as well as in the stator conductors. The laminations are insulated from each other usually by a varnish layer. This breaks up the conducting path in the steel and limits the losses (known as eddy current losses) in the steel.
The stator coils are normally made of copper; round conductors of many turns per coil are used for small motors, and rectangular bars of fewer turns are employed for larger machines. The coils are electrically insulated. It is common practice to bring only three leads out to a terminal block whether the winding is connected in wye or in delta.The magnetic part of the rotor is also made of steel laminations, mainly to facilitate stamping conductor slots of the desired shape and size. In most induction motors, the rotor winding is of the squirrel-cage type where solid conductors in the slots are shorted together at each end of the rotor iron by conducting end rings. In such machines there is no need to insulate the conductors from the iron. For motors up to about 300 kilowatts, the squirrel cage often consists of an aluminum casting incorporating the conductors, the end rings, and a cooling fan. For larger motors, the squirrel cage is made of copper, aluminum, or brass bars welded or brazed to end rings of a similar material. In any case, the rotor is very rugged and is also economical to produce in contrast to rotors requiring electrically insulated windings.Starting characteristics.When operated from a constant-frequency supply, the three-phase induction motor constitutes essentially a constant-speed drive, with the speed decreasing only 1 to 5 percent as load torque is increased from zero to rated value. In most installations, induction motors can be started and brought up to speed by connecting the stator terminals directly to the electric supply. This establishes the rotating field in the machine. At zero speed the velocity of this field, relative to that of the rotor, is high. If the rotor current were limited only by the resistance of the rotor bars, the rotor currents would be extremely high. The starting current is, however, limited by additional paths for the magnetic field around the stator and rotor conductors, known as flux leakage paths. Usually, the starting current is thus limited to about four to seven times rated current when started on full voltage. The torque at starting is usually in the range of 1.75 to 2.5 times rated value.Protection
The heat generated by power losses in the conductors and iron parts of the machine, as well as the friction heat, must be removed by the cooling system to limit the temperature of the motor. The main purpose of protection apparatus is to prevent damage to the most vulnerable part of the motor, the insulation on the stator windings. For low-power motors, a temperature-sensitive device is often mounted inside the motor and used to switch off the electric supply if the temperature reaches its limiting safe value. With larger motors, temperature-sensitive detectors may be imbedded at one or more locations in the stator windings.
WATCH OUR OTHER VIDEOS

Reverse Forward Motor Control || Reverse Forward Motor Starter Wiring || Forward Reverse Starter
   • Reverse Forward Motor Control || Reverse F...  

What is VFD 🔴VFD PROGRAMMING/ PARAMETERS SETTING/COMMISSIONING Explained by Evergreen Electrical
   • VFD | VFD Motor control  | Veriable Speed ...  

Large Motor Bearing Replacement
   • Induction Motor | Bearing replacement | El...  
Capacitor check with multimeter | Capacitor explained || कॅप्‍यासिटर की जांच | Capacitor tutorial
   • Capacitor Testing | Capacitor check with m...  

Difference between MCB and MPCB || MPCB and MCB || Evergreen Electrical
   • What is MPCB in hindi | Motor Protection C...  

Magnetic Contactor Working Principle | How Magnetic Contactor Works | Evergreen Electrical

   • Ac Contactor Check | How Magnetic Contacto...  

Star Delta Starter Power Connection with Wiring diagram by
Evergreen Electrical
   • Star Delta Starter Power Connection with W...  

Star Delta Control Circuit || Star Delta Starter in Hindi || Star Delta Control Wiring
   • Star Delta Control Circuit | Star Delta Po...  

3 Phase Induction Motor Connections Explanation 2019
   • Induction Motor Connection | 3 Phase Induc...  

Electrical Timer in Hindi || Timer Circuit || Delay off timer circuit || Timer switch 2019
   • Electrical Timer || Timer Circuit || Delay...  

Float Switch Wiring | Float Switch/level switch Installation for Water Tank by Evergreen Electrical
   • Float Switch Wiring | Float Switch| Level ...  
----------------------------------------------------------------------------------------------------------
Thanks for Watching our videos.
#InductionMotor #Connection #HowToCheck #Multimeter