Antique Dented Oiler - Perfect Restoration

In this video, I restored an old oiler I was given as a gift. It was heavily dented and misshapen. It also had markings engraved into it. I completely took it apart and gave it a new life.

Timestamps:
0:00 Start
0:31 Draining old oil
0:55 Start of disassembly
2:27 Getting the parts ready for cleaning
2:36 Into the ultrasonic cleaner
2:55 Hammering out the dents in the can
3:59 Fixing the bent handle
4:25 Parts are out of the ultrasonic cleaner
4:52 Smaller parts go into the Evaporust
5:07 Getting Paint off the main can
5:40 Main can goes into the Evaporust
5:45 Out of the Evaporust
6:55 Wirewheeling off any remaining paint and oxides
7:48 Patching the imperfections in the can with Bondo
8:31 Cleaning up excess Bondo
8:59 Sanding down the Bondo
9:17 Prepping for paint
9:21 Painting
9:37 Paint is done drying
9:45 Polishing the brass tip
10:17 Start of re-assembly
10:30 Cutting a new gasket
11:31 Refilling the oil
11:38 Bleeding the line and getting it pumping
11:46 Finished product

Evaporust: https://evapo-rust.com/buy/