Adaptation TCU 2.0 TurboLamik 8HP
Автор: TurboLamik
Загружено: 2021-10-12
Просмотров: 9967
Turbolamik.eu
Adaptation is needed to calculate the correct pressure on the clutches
If you want to do adaptations, you have to meet the following points
1. Oil Temp 50-80 degrees Celsius, optimal oil temperature is about 70 degrees
2. Adaptations should be made on the "P3" program
3. The lockup switch in the on position
Before starting the adaptation you drive a car about 3 minutes,
the display shows the letter "A" in the upper right corner
The letter "A" is displayed only when the conditions are met for proper adaptation
Drive the car and change gears up when the engine speed is two thousand 2000RPM.
We only adapt gear changes:
3 to 4
4 to 5
5 to 6
6 to 7
Change gears like on a video
You will see on the film that I am accelerating very slowly
When you drive a car you will notice that the letter "A" does not display all the time.
"A" will be displayed when the torque on the engine will be in the range of 20-130 Nm
Remember when changing gears the letter "A" must be displayed.
You should do about 20 sequences
The adaptation is saved automatically when the ignition is switched off
Доступные форматы для скачивания:
Скачать видео mp4
-
Информация по загрузке:
