How To Install a Light Bar | 2021+ Ford Bronco

Learn how to easily install a Borne Off-Road Light Bar for the 2021+ Ford Bronco!

Need a premium-quality lights for your off-roading vehicle? Click the link below for all our 2021+ Ford Bronco direct fit lights:
https://www.borne.com/lighting/direct...

Dan, the product engineer of our Borne-Off Road Lights, will give you an in-depth, step-by-step tutorial on how to properly install the 40" and 50" Borne Off-Road Direct Fit Light Bar.

Steps:
0:00 Intro
0:07 Included materials
0:57 Tools needed
1:39 Disconnect the negative terminal from the battery
2:23 Unbolt the expansion tank
3:16 Create a path through the firewall for the wire harness
4:15 Disassemble the vehicle
8:11 Upfitter wiring harness install steps 16 - 31
17:48 Universal wiring Harness install steps 32 - 48
29:52 Remove the covers of the accessory mounting points
30:46 Install the drilling fixture
31:07 Drill a hole through the windshield frame
31:46 50" Light bar install steps 54 - 68
38:35 40" Light bar install steps 69 - 82
43:16 Insert the 40/50" light bar wires into the female connector
43:54 Insert the locking wedge into the connector
44:32 Connect the light bar harness to the previously installed wire harness
44:52 Reassemble the vehicle
48:50 Mount the wire harness relay and secure your positive and negative wires
50:08 Connect the positive and negative wires to a suitable power distribution point
51:01 Reconnect the negative terminal to the battery
51:31 Outro



Follow our Socials:
Instagram:   / borneoffroad  
X:   / borneoffroad  
Facebook:   / borneoffroad