Never Drill Blindly into Studs and Joists (Always Check Other Side Before Drilling)

🔨 ELECTRICAL ROUGH-IN SERIES:
https://becoming-an-electrician.com/t...

🔨 RECOMMENDED TOOLS FOR ELECTRICIANS: https://becoming-an-electrician.com/r...

🏡 VISIT WEBSITE!: https://becoming-an-electrician.com/a...
📕 FREE Book for Electricians: https://becoming-an-electrician.com/s...

It's really easy to get lazy when drilling holes for wires, but you must check the other side of studs and joists before drilling.. never drill blindly into studs!

The best way to check is to visually look at both sides to make sure nothing is there.. and if you can't, you should at least try to feel with your hand to make sure NOTHING IS THERE before drilling!


=================================

🔨 RECOMMENDED TOOLS FOR ELECTRICIANS: https://becoming-an-electrician.com/r...

📕 FREE Book for Apprentice Electricians:
https://becoming-an-electrician.com/s...

👷‍♂️ More INFO about "Becoming-an-Electrician.com":
https://becoming-an-electrician.com/a...

✉ CONTACT Riley:
https://becoming-an-electrician.com/c...

=================================

DISCLAIMER ABOUT MY ELECTRICAL VIDEOS:
Do not do anything in my videos..
Follow all local electrical codes for proper installation and safety.
Becoming-an-Electrician.com will not be held liable for any damages caused by watching these videos. They are intended for education purposes only.
Make sure to get professional advice and get your work inspected by a proper electrical inspector in your area.