How to Replace Passenger Side Control Arm 2007-2017 Jeep Compass

Buy Now!
New Control Arm with Ball Joint from 1AAuto.com https://trq.video/ic-1ASLF00233

This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2007-2017 Jeep Compass. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.

This repair was done on a 2017 Jeep Compass Latitude 2.4L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2007 Jeep Compass
2008 Jeep Compass
2009 Jeep Compass
2010 Jeep Compass
2011 Jeep Compass
2012 Jeep Compass
2013 Jeep Compass
2014 Jeep Compass
2015 Jeep Compass
2016 Jeep Compass
2017 Jeep Compass

Tools you will need:
• Pry Bar https://trq.video/oHo-1AXAA00020
• 18mm Wrench
• 21mm wrench
• 10mm Socket https://trq.video/oaI5-1AXAA00017
• 18mm Socket
• 19mm Socket
• 21mm Socket
• 32mm Socket https://trq.video/obK-1AAST00003
• Pickle Fork
• Trim Tool Set https://trq.video/oS6-1AXXX00006
• Needle nose pliers https://trq.video/ow2-1AXAA00051
• Needle nose pliers https://trq.video/ow2-1AXAA00052
• Straight Cutters
• 1/2 Inch Impact Gun https://trq.video/ona-1AXAA00252
• Ratchet https://trq.video/obcW-1AXAA00016
• Socket Driver
• Socket Extensions https://trq.video/oaY5-1AXAA00015
• Swivel
• Torque Wrench https://trq.video/oai3-1AXAA00044
• Bungee Cord
• Rust Penetrant
• Floor Jack https://trq.video/oNS-1AXAA00068
• Hammer
• Jack Stands https://trq.video/oKC-1AXAA00065
• Rubber Mallet
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Jeep Compass 2007-2017 1st Generation:    • Jeep Compass 2007-2017 1st Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.