Quick Fix - Mamiya RZ67 Pro, Pro II: How to Remove a Stuck Lens

If this video helped you out, feel free to buy us a cup of coffee. It's not expected but always appreciated.
https://www.buymeacoffee.com/BRCamera


Are you unable to remove your RZ67 lens from the camera body?

Here's the breakdown of the cause and how to fix it. Make sure to watch the entire video before attempting this procedure. Compared to the RB67 release, the RZ release can be much more challenging. Be sure that your lens locking ring is turned all the way counter clockwise before probing for the release.


Affected cameras include the Mamiya RZ67 Pro and the Pro II.



Note: This procedure does not work with the Mamiya RB67, but we do have another video covering a procedure for removing a stuck lens on the RB.

RB67 Video:    • Quick Fix - Mamiya RB67 Pro, Pro S, Pro SD...  

Feel free to contact us at: bill@mamiyarepair.com

=========================
If this or any of our videos was able to help you make sure to like and subscribe. If you have ideas for future videos let us know in the comment section. And if you need any of the required parts for our repair videos feel free to contact us. We have an extensive catalog of replacement parts spanning the last 4 decades of photography.

This video is designed to serve as a guide, and because each repair may be fact dependent we can not guarantee that the information presented here will fix your issue. We are not responsible for any damage to your equipment while attempting these procedures.