Drilling procedure for UNIQA Dental Pure & Porous Implant UH8 UV11 [ 3.75 mm | D2-D3 bone density ]
Автор: Uniqa Dental
Загружено: 2023-03-23
Просмотров: 7607
🦷 Uniqa Dental Drilling Protocol https://uniqa.dental/wp-content/uploa...
🦷 Video description of the drilling protocol
IMPORTANT: Before inserting UNIQA Dental implants, you should familiarize yourself with the protocol for properly preparing the site in readiness for implant placement.
For example, the video shows the sequence of operations for inserting a 3.75 mm diameter implant into D2-D3 bone.
First, a hole must be made in the hardest cortical layer of the bone to a depth of 1 to 2 mm using a special drill for cortical bone.
Then, using a pilot drill with a diameter of 2 mm, make a hole to the full-depth, usually up to 10 mm. The recommended speed is 1000 rpm, maximum 1200 rpm. Do not forget intensive irrigation to cool the bevel and surrounding bone. Drill with moderate force so that you do not feel resistance to the bone.
Next, take a drill bit with a diameter of 2.5 mm and drill down to half of the depth of the future hole.
The next diameter drill to use is 2.8 mm. Drill down to a quarter of the depth of the future hole with this bit.
Next, using a 3.2 mm drill, expand the mouth of the hole to the depth of the cortical bone layer, which is usually 2 to 2.2 mm.
Replace the drill bit if you feel any resistance to the bone, as it is possible that the one you are working with is blunted.
Under no circumstances should you drill without water. Without intensive irrigation you can overheat the bone and cause thermal necrosis of the bone, which occurs after the placement of the implant.
Place the implant in the resulting hole. The aggressive thread profile of Uniqa Dental implants allows you to screw it directly into the bone tissue and ensure good primary stability.
Attention! Maximum allowable torque when inserting the implant is 50N*cm
Visit Uniqa Dental site https://uniqa.dental/?utm_source=yout...
More videos on this topic:
The dental implants is placed on the smile line? • The dental implants is placed on the smile... .
From a broken bar to screw retained restoration: • From a broken bar to screw retained restor... .
Cemented restoration vs Screw Retained restoration in lack of space: • Cemented restoration vs Screw Retained res... .
How to avoid bone loss in screw retained restoration? Using dental materials in case: • How to avoid bone loss in screw retained r...
#dentalimplantsprocedure #dentalimplants #dentalimplantplacement #dentalimplantsvideo
#dentalimplantprocedure #implantdrillingprocedure 🔗 Visit Uniqa Dental site https://uniqa.dental/?utm_source=youtube /
🔗 Personal-manager https://uniqa.dental/uniqa-personal-m...
🔗 Full-Arch Restoration Workflow solution https://uniqa.dental/all-on-4-6-impla...
Product 🦷
🔗About Test Kits https://uniqa.dental/about-trial-kits...
🔗About Implants https://uniqa.dental/uniqa-dental-imp...
🔗Trial Kits https://uniqa.dental/trial-kits/?utm_...
🔗Implants https://uniqa.dental/implants/?utm_so...
🔗Abutments https://uniqa.dental/abutments/?utm_s...
🔗Multi-Unit Abutments https://uniqa.dental/multi-units/?utm...
🔗Accessories for MUA https://uniqa.dental/accessories-for-...
🔗CAD/CAM https://uniqa.dental/cad-cam/?utm_sou...
🔗Overdenture https://uniqa.dental/overdenture/?utm...
🔗Laboratory https://uniqa.dental/laboratory/?utm_...
🔗Instruments https://uniqa.dental/instruments/?utm...
📞Customer Care:
+1 737 710 17 25
📞 Logistics:
+1 201 546 16 13
✉️ Uniqa Dental Ltd
350 W Passaic St (3rd floor),
Rochelle Park, NJ 07662
✉️ 2 Ha-Tsoran St,
Netanya, 4250602,
Israel .
‼️
Disclaimer
"The drilling protocol provided is only a general guideline and must be adapted to the individual patient, in particular to the clinical conditions, bone quality and surgeon preference. The practitioner is responsible to determine the appropriate protocol for each case based on the practitioner’s clinical knowledge, judgment and experience and the individual patient’s requirements. Uniqa Dental Ltd. does not accept any liability for any inconvenience or damage resulting from the use of the provided drilling protocol information."
Доступные форматы для скачивания:
Скачать видео mp4
-
Информация по загрузке: