Generac 7000 XG series enclosed in a Suncast shed

Enclosed Suncast Shed from Loews, Fantech 2SHE1021 10 in. Shutter fan from Ebay, a 3-inch flexible exhaust pipe from Pepboys inside a 6 inch double insulated pipe from Home Depot.The flex pipe is held by a 3-inch Magnet with an 1-inch diameter center hole for generator exhaust, 1-12x12 air vent another 1-14x14 air vent on the back side of shed this creates a cross draft air flow, a double 3/8 inch plywood with left over Brazillian Cherry engineered floor 5/8 thick, framed by 2x3's composite wood, and a 2 piece set Dryer exhaust with a 5inch diameter sheet metal plate holding exhaust in place. The exhaust fan did not come with an extension cord, this was also purchased at Home Depot. The bottom base 3x5 blocks was also purchased at Home Depot... The shutter fan was framed with composite plastic moldings to ensure durability for weather conditions..This project took approximately 10 hours to complete and this idea came from another You Tube video in which I modified several details. Again, I hope this video is helpful. I still plan to buy the tri-conversion kit from US Carburetors.com to convert to this generator to natural gas with 3/4 inch piping...