How to Replace Front Engine Mount 2008-2012 Honda Accord

Buy Now!
New Engine Mount from 1AAuto.com https://trq.video/ia-1AEMT00448

This video shows you how to install a new engine mount on your 2008-2012 Honda Accord. A shaking or vibrating engine, or bucking when changing gears are signs of worn engine mounts.

This repair was done on a 2010 Honda Accord LX-S 2.4L Coupe 2-Door FWD Manual and the process should be similar on the following vehicles:
2008 Honda Accord
2009 Honda Accord
2010 Honda Accord
2011 Honda Accord
2012 Honda Accord

Tools you will need:
• 10mm Wrench https://trq.video/oiL-1AXAA00010
• 10mm Deep Socket
• 14mm Socket https://trq.video/oDf-1AXAA00015
• Trim Tool Set https://trq.video/okc-1AXXX00006
• Ratchet https://trq.video/oFS-1AXAA00016
• Socket Extensions https://trq.video/oDf-1AXAA00015
• Swivel
• Torque Wrench https://trq.video/osU-1AXAA00044
• Block of Wood
• Floor Jack https://trq.video/ojQ-1AXAA00068

Subscribe:    / @trq  

Check out our playlist:
Honda Accord 2008-12 8th Gen:    • Honda Accord 2008-12 8th Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.