2014-2017 Fiesta ST Backup Reverse Camera Install

These instructions are good for the 2014-2015 Fiesta. 2016 and 2017 year models the wiring and install is the same including the connector that goes to the head unit, however the process with FORScan is slightly different and I don't have that information here but go to the link on the bottom of the discussions it will take you to the thread to enable it. Since day 1 of owning my Fiesta I really wish it had a backup camera. Now their is a way to have that in our cars since it was not an option. The install of this camera replaces one of the license plate lights and works just like factory. The total cost for me was only $30 to have a factory like backup camera and a few hours of time to install it. You will also need an ELM327 OBD2 connector to enable it which costs another $30. So if you don't have one it will cost you approximately $60 for this install. The video is long and for the most part un-edited because it shows some of the struggles and some ideas how to overcome so please watch the whole video.

Tools needed:
10mm socket and wratchet
Side cutters
Mechanics wire / metal hanger or something to guide the wire
Flat head & Phillips screwdriver
Plastic pry bars (optional)
Extra wire 22 gauge (I believe)
Wire connectors for the back of the radio
Backup camera
ELM327 OBD2 connector
FORScan w/ extended license (free from their site good for a couple days
Patience and a few hours

Links to these parts:
Camera
http://www.ebay.com/itm/Backup-Car-Re...

ELM327 OBD2 connector
http://www.ebay.com/itm/ELM327-USB-OB...

Wire connectors
http://www.mouser.com/ProductDetail/T...

Additional information
http://www.fiestastforum.com/forum/th...