How to replace the front brake pads Yaris mk2 🚗

BUY THE AUTO PARTS you need for the operation : 👉 http://bit.ly/cheapAutoparts 👈
📱 DOWNLOAD THE APP : 🍎 http://bit.ly/MCD12AppStore, 🤖 : http://bit.ly/MCD12PlayStore 📱
⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎

🛠📏⚙ FIND ALL THE PARTS AND TOOLS NEEDED AND RECOMMENDED BY USETOOL EN ⚙📏🛠

Needed parts:
Brake cleaner : http://bit.ly/brakecleaneren

Brake pads : https://maclede12.co/brake-padsgdb3457en

Copper grease : http://bit.ly/coppergreaseen

💪 TIGHTENING TORQUES FOR FRONT BRAKE PADS TOYOTA Yaris mk2
No tightening torques for this operation

Discover a vast array of services that will help you run the maintenance of your car: vehicle user manuals, maintenance planning and mechanics-oriented tutorials!
Front brake pads on a Toyota Yaris mk2 .

Discover the world of UseTool EN

Needed tools:
-💣🤖🏆The complete toolbox recommended by UseTool EN to repair your Yaris mk2 : https://maclede12.co/toolboxCLASOS3050en 🏆🤖💣

Socket wrench
Flat head screwdriver
Wheel lug wrench
Thin flat head screwdriver
Lineman's pliers
Paper towel
7mm Allen socket
Wire brush
Sandpaper
Torque wrench: https://maclede12.co/torquewrenchCLAS..., https://maclede12.co/torquewrenchCLAS..., https://maclede12.co/torquewrenchCLAS...

🔝💪Safely lift your Yaris mk2 with the hydraulic jack: https://maclede12.co/jackCLASOH5304en and axle stands: https://maclede12.co/standsCLASOM3030en recommended by UseTool EN 💪🔝

Hydraulic jack
Wooden peg
Axle stand

🚗📢💡 RESOURCES 💡📢🚗

Usetool's warnings
Once the operation is completed, you'll need pump slowly on the brake pedal a few times until feeling a strong resistance from the pedal. The aim being to bring the brake pads closer to one other.

Drive smoothly and avoid sudden braking for the first 50 kilometres or so to avoid glazing the new pads.

Make sure to check the stability of your vehicle before starting the operation.

Don't burn yourself on the pads if you've just gone for a drive as braking creates friction and long-lasting heat.

Usetool's info
What do we mean by "glazing new brake pads"?

Break pads are made of a material that needs to be run-in when new. If this procedure is not done properly, when braking too hard, the material overheats and hardens. Consequently, the brakes become less effective.

📽❤️🚨 USEFUL VIDEOS 🚨❤️📽
[ USETOOL'S TIPS & TRICKS ] Lifting your vehicle safely :    • How to (PROPERLY) lift your vehicle safely...  

[ USETOOL'S TIPS & TRICKS ] Removing and reinstalling a wheel :    • ASTUCE : Pneu crevé ? Déposer et reposer u...  

How to replace front brakes, rotors and pads (Complete guide) 🚘 :    • How to replace front brakes, rotors and pa...  

[ USETOOL'S TIPS & TRICKS ] How to (PROPERLY) use a torque wrench? 🔧 :    • How to (PROPERLY) use a torque wrench? 🔧  

Space Race by tubebackr |   / tubebackr  
Music promoted by https://www.free-stock-music.com

Terms and conditions of the offer : https://www.mister-auto.co.uk/operati...

Disclaimer: This video was created for information purposes and does not guarantee the outcome of actions undertaken.
To ensure that you see the best results, we recommend getting in contact with qualified technicians who will carry out the installation.
This video provides tips and recommendations that can be useful when repairing or changing parts. MCD12 and its partners cannot be held responsible for any physical and material damage that comes from the poor installation or incorrect interpretation of the video content.
This video was created for information purposes and does not guarantee any outcomes. The user is solely responsible for the incorrect use of repair machines, tools and parts, in particular if these may cause physical damage. MCD12 and its partners recommend taking great care and carefully following the safety rules when carrying out the repair or replacement of any parts. Please keep in mind that using poor quality parts compromises the safety of the driver when on the road.

0:00 Intro
0:15 Remove the pads
2:31 Replace the pads
5:14 Tips