Replace Front Brake Pads & Rotors - Audi S4 & S5 B9 2018+

Replace front brakes and rotors. Apply to Audi S4 & S5 B9 2018+ models with 6-piston calipers. Probably works for 4M Q7/Q8, B9 Q5/SQ5/S4/S5/RS5, C8 A6/A7, and D5 A8 too.
Brake pads upgraded to EBC Yellow Stuff. Rotors upgraded to ECS Tuning 2-Piece Rotors.

0:00 Intro
0:49 Remove wheel and raise car
1:56 Remove caliper
5:34 Remove brake pads
6:50 Replace brake rotor
8:37 Install brake pads
12:56 Install caliper
15:42 Install wheel
16:18 Summary

Tips:
12/11/2022 A good tip: Turn your wheel to the maximum when changing calipers. It will be easier to reach.
11/17/2023 A tip from comments: "You don't need that fancy $70 M10 TZN Stubby set. Turn the steering wheel to gain access to the bracket and caliper bolts. This will give you a full foot in there. For example, when working on the right front brake, turn the wheel to the left to access those bolts without special tools."

Tools:
Wheel cap removal tool.
17mm socket to remove wheel bolts.
12-point M10 bit socket to remove the bracket.
13/16 inch or 21mm socket to remove caliper.
6-point T30 bit socket to remove the rotor bolt.
Caliper Piston Spreader Tool.
Brake caliper grease.
Rust remover.
Wrench or breaker bar to loosen bolts.
Torque wrench to tighten bolts.

Tool links:
6-point T30 bit socket: Schwaben Complete 26 Pc Stubby Socket Driver Set https://www.ecstuning.com/b-schwaben-...

Tightening specs:
Wheel bolts: 120Nm
Caliper bolts: 200Nm

Related videos:
Replace rear pads and rotors:    • Replace Rear Brake Pads & Rotors - Audi A4...  
Find Audi Repair Manuals and Buy Brake Parts:    • Find Audi Repair Manuals and Buy Brake Par...