How to Replace Bumper 2005-2010 Pontiac G6

Shop for New Auto Parts at 1AAuto.com https://trq.video/c-9-M

This video shows you how to install a new TRQ bumper cover on your 2005-2010 Pontiac G6.

This repair was done on a 2009 Pontiac G6 Base 2.4L Sedan 4-Door FWD and the process should be similar on the following vehicles:
2005 Pontiac G6
2006 Pontiac G6
2007 Pontiac G6
2008 Pontiac G6
2009 Pontiac G6
2010 Pontiac G6

Tools you will need:
• 10mm Socket https://trq.video/ozV-1AXAA00017
• 7mm Socket https://trq.video/ozV-1AXAA00017
• Trim Tool Set https://trq.video/okM-1AXXX00006
• Metal Cutters
• Socket Driver
• Gloves https://trq.video/oer-1AXSS00048

Subscribe:    / @trq  

Check out our playlist:
Pontiac G6 2005-2010 1st Generation:    • Pontiac G6 2005-2010 1st Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.