HOW TO INSTALL A * PLYWOOD * VAN - FLOOR FULLY INSULATED WITH KINGSPAN AND SUPER FOIL MEMBRANE

IN THIS VIDEO I SHOW YOU HOW TO INSTALL A PLYWOOD VAN FLOOR FULLY INSULATED WITH KINGSPAN AND SUPER FOIL INSULATION VAPOUR BARRIER.

TO START WITH CLEAN THE VAN FLOOR :
I USED 1:INCH X 2: INCH TIMBER BATTENS MEASURED AND CUT I THEN STUCK THEM DOWN TO THE RAISED AREA OF THE VAN FLOOR GOING ACROSS THE RIBED AREA I USED A STRONG ADHESIVE FOR THIS CALLED CT1 WHICH IS A MULTI PURPOSE SEALANT & ADHESIVE I SET THE BATTENS OUT AT 400MM CENTRE'S
I USED 1: INCH THICK KINGSPAN TO GO IN BETWEEN THE BATTENS
I USED SUPERFOIL INSULATION ROLL ENERGY SAVING DIY BUBBLE FOIL SHEET 3-IN-1 SUSTAINABLE THERMAL INSULATION REFLECTIVE RADIANT BARRIER & VAPOUR BARRIER - MULTI PURPOSE FOR HOME & AUTO.
I USED HARDBOARD AND CARDBOARD FOR THE TEMPLATES
I USED A MEASURE AND SCRIBE METHOD TRANSFERRING THEM TO THE HARDBOARD AND CARDBOARD TEMPLATE'S THEN TEMPLATES WERE THEN TRANSFERRED TO THE PLYWOOD
I DID THGE CUT-OUT'S WITH A JIGSAW
I USED HALF - INCH STRUCTURAL PLYWOOD ITS THE PERFECT MATERIAL FOR VEHICLE FLOORS BECAUSE ITS ROBUST, LONG-LASTING AND MOISTURE -RESISTANT
I USED RONSEAL ULTIMATE PROTECTION DECKING PAINT IN THE COLOUR CHARCOAL AND GIVE THE PLYWOOD 4 -COATS
I USED AN L SHAPED METAL TRIM TO FINISH OFF THE EDGE'S AND AROUND THE FOOT STEP 50MM X50MM
A FULLY INSULATED FLOOR IS IDEAL IF YOUR USING YOUR VAN AS A CAMPER VAN IT GIVES YOU ALL THE THERMAL AND SOUND PROPERTIES YOU NEED, INSULATING AND PLYING OUT YOUR VAN FLOOR WILL DEFINITELY REDUCE TRAFFIC NOISE QUITE SIGNIFICANTLY.

Thanks for watching! Subscribe to my channel here: 👇
   / @creativecrambo