DIY Remote Control rotating motorized Garmin Panoptix Livescope system forward/perspective boat mnt

Subscribe and I will gladly help you build your own as well.

see other videos at    • Panoptix Livescope Remote Control Rotating...  

My DIY Remote Control Scanning Garmin Livescope system with forward, down, and perspective mount, Panoptix Livescope Rotating Mount Build for a Boat. It is designed with 3D printed parts and Amazon motor and remote. I can control the turning of the LVS32 transducer with a simple remote control motor. Internally I used a GT2 6mm belt loop around 600mm along with 3d printed GT2 gears designed to fit the 8mm motor shaft and custom-designed Teeth/geared Pulley around the 1.5in PVC for the inside piece which goes inside the 2in PVC T joint. The rest of the parts were 3D printed to fit my boat and mounting hardware. The printed parts include the Umount for transducer where I can rotate up, down and side to side into perspective mode, forward or down mode. The cable is hidden inside the 4ft long 1.5in PVC which in held by ft piece of 2in PVC and 2in T PVC and 8in long 2in PVC section which the motor is mounted to.

This is still a work in progress! I am constantly updating 3D printed parts on this setup. LOL

my electronic setup besides the Livescope system is a new EchoMap Plus 94SV. I had an Echomap 94SV but it had to be Plus unit, UHD, or ultra to work w Livescope.

motor $22
https://www.amazon.com/dp/B01D5PZJFM/...

remote $14
https://www.amazon.com/dp/B07NJNBC2J?...

belt $8
https://www.amazon.com/dp/B07WP6VJ66/...

1.5in and 2in PVC $20 max
Lowes and Home Depot

Credits for ideas:
Thanks to Southern Reel Fishing at    • Livescope Perspective Mode Testing, Settin...  
Thanks to Skunked Again at    • How to DIY Wireless Control #Garmin #Lives...