Landscaping a garden, time-lapse music video. (info in description)

This is a complete garden build from February 2018. A great design and fantastic customers. The second day on the project was the start of the Beast from the East which lasted most of the project and was followed by record rainfall.

Egyptian limestone (Pyramis gold) paving
globelstone tudar clay pavers
everedge lawn edging
george davis turf.

This is one of our favourite projects to date.

Time scale around 6 weeks with an extra 2 weeks lost at the beginning due to the snow on the ground.

The existing garden had a level patio stepping down onto a level lawn which both held water. By using the correct 1:80 fall on the new patio and slightly raising the lawn to continue the fall , it allows water to run off to the gravel area at the back. It also eradicates the need for the step.

Paving and paths were both layed on 100mm of compact mot type 1 with a fabric membrane underneath.

The path edging course was bedded length ways and pointed giving a solid edge for the other blocks to be infilled. The infilled pavers were set on a narrow bed (20mm) of screeded compact sharp sand about 3mm higher than the edging. They then have kiln dried sand brushed in and are wacked with the compactor to level and secure the whole path.

The patio is layed on a full bed around 50mm thick of sharp sand and cement 5:1. A primer is made up of neat cement and SBR whisked into a thick consistent paste and rolled onto the backs. Traditional pointing of a semi dry soft sand and cement 3:1 mix with a tiny amount of feb additive.

The lawn areas where temporarily boarded to prevent over compaction whilst working in the rain. Once clear, everedge lawn edging is clipped together and hammered into the ground to create the boarders. The lawn area then rotovated with a petrol cultivator to aerate the soil. Its then raked out and topped up with lawn grade silica soil. Its all then raked level and compacted under foot to firm it up - know as 'pigeon stepping' or the 'horticultural shuffle'. The flattened soil is then raked out to the final level known as a tilth ready for the turf. Turf rolls are rolled out in a staggered pattern starting one side and then working back and forth from one side to the other. The rolls are knitted together meaning they are carefully butted up without a gap or overlapping. Boards are placed over the turf so not to be walked on whilst laying, they are also used to jump on and flatten the rolls at the end. The edges are cut in with a serrated bread knife making sure there are no small cuts that could dry out too quickly while the grass establishes.

It was a real testament to George Davis Turf to be able to supply grass this quality after the 6 weeks of awfull weather the country just had.

Thanks for watching!

build by Sam keep and nathan stone.

All images copyright ©HowWeLandscape 2021

This is and example of one method of installing and not an official guide video. We take no liability for the accuracy of information in this video. Do plenty of research before attempting any works.