how to not install an LT2 intake manifold

from amazon almost costing me to multiple faulty/incorrect parts, i managed to persevere and complete this install. bunch of videos out there using different parts, some show how to install but no links in the description, others give the links but dont show how to install. luckily this has both but if you have any questions or are in doubt please ask away!

in all seriousness the install itself wasnt that bad and it was nice to see how my intake valves are doing on my first direct injection engine. if i can do it so can you with the right tools! no tune necessary either.

___________________________________________________________________________
PARTS:
Chevrolet Corvette C8 LT2 Intake Manifold (12697714): https://gwatneyperformance.com/chevro...

ICT Billet Wire Extension 24", OEM Delphi (Connector, Lock, Seals, and terminals: https://www.amazon.com/dp/B07MG5KHJ9?...

TAILONZ PNEUMATIC Male Straight 1/2 Inch Tube OD x 3/8 Inch NPT Thread Push to Connect Fittings (for brake booster): https://www.amazon.com/dp/B08861QRTZ?...

Permatex 82180 Ultra Black Silicone Gasket Maker 3 oz (for air sealing barb hole): https://www.amazon.com/dp/B0002UEN1U?...

GM Genuine Parts Engine Intake Manifold Gasket (12626354): https://www.rockauto.com/en/catalog/c...

Dorman 800-172 Connector 10mm Steel TO 8mm Nylon 90, 2 Pack (for lt2 plastic nipple): https://www.amazon.com/dp/B00CI6FBYE?...

Duralast 3/8in Silicone Hose (for 8mm connector on lt2 plastic nipple): https://www.autozone.com/transmission...

Nitro 1/4in to 5/8in Hose Clamp 4 Pack (for clamping hose to 8mm connector} : https://www.autozone.com/gaskets-and-...

TOOLS:
RYOBI ONE+ 18V Cordless 1/2 in. Drill/Driver Kit with (2) 1.5 Ah Batteries and Charger: https://www.homedepot.com/p/RYOBI-ONE...

Drill America 3/8" Carbon Steel NPT Pipe Tap and 37/64" High Speed Steel Drill Bit Set, POU Series: https://www.amazon.com/dp/B01MFG7R5Q?...

RYOBI ONE+ 18V Cordless Oscillating Multi-Tool: https://www.homedepot.com/p/RYOBI-ONE...

timecodes:
0:00 intro
1:00 prepping the lt2 manifold
1:39 amazon sabotage
1:57 altering the manifold
2:56 removing lt1 manifold
5:05 inspecting intake valves
5:35 removing the brake booster
6:02 moment of realization/changing plans
7:05 drilling & tapping
8:49 transferring sensors, gaskets and bolts
9:49 cutting the foam/manifold adjustments
10:46 securing the lt2 manifold & connections
11:48 turning on the car & test drive