High Quality Wall Paint | Step-by-Step Guide | EPODEX

Application Metallic Brush Effect
1. Cover/tape off areas not to be covered with a plastic drop cloth and masking tape.
2. Mix the PRIMER thoroughly and dye it with WB pigment in anthracite grey, light grey, grass green or purple red and apply with a paint roller and allow it to dry.
3. Mix EFFECT PAINT with the supplied metallic pigment and roll in a criss cross pattern onto the primer with a foam roller. Stop painting once the desired finish is acchieved. We recommend a colour proportion of approx. 3%, e.g., 30g metallic pigment to 1kg EFFECT PAINT.
4. When painting ceilings and walls, we recommend painting the ceilings first and then the walls.
Notes: Processing temperature: Room and substrate temperature must be at least 8°C. Do not apply on heated surfaces or in direct sunlight. Drying problems may occur at low temperatures. To achieve a lower viscosity, thin the paint with up to 5% water. Clean tools with water immediately after use.