How to Replace Valve Cover 2007-2010 Chrysler Sebring (2.4L)

Buy Now!
New Valve Cover from 1AAuto.com https://trq.video/ib-1AEVC00088

This video shows you how to install a valve cover on your 2007-2010 Chrysler Sebring (2.4 L). Under the valve cover, you have camshafts and the valvetrain spinning and flinging oil everywhere. When you do see oil around your valve cover, you know it’s time to replace the gasket or the cover itself.

This repair was done on a 2010 Chrysler Sebring Touring 2.4L Sedan 4-Door FWD and the process should be similar on the following vehicles:
2007 Chrysler Sebring
2008 Chrysler Sebring
2009 Chrysler Sebring
2010 Chrysler Sebring

Tools you will need:
• Pry Bar https://trq.video/oka-1AXAA00020
• 11mm Wrench https://trq.video/okT-1AXAA00010
• 8mm Socket https://trq.video/oES-1AXAA00017
• T30 Socket
• Ratchet https://trq.video/oNv-1AXAA00016
• Torque Wrench https://trq.video/ow3-1AXAA00044
• Cloth Rags https://trq.video/ogu-1AXSS00035
• RTV
• Razor Blade / Gasket Scraper

Subscribe:    / @trq  

Check out our playlist:
Chrysler Sebring 2007-2010 3rd Generation:    • Chrysler Sebring 2007-2010 3rd Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.