WOOD Ship Model MAKING 103, The Beginner's Guide, Muscongus Bay Lobster Smack

So many would-be modelers want to begin by building a huge 100-gun ship of the line. Most of those very expensive kits get started but never finished. The job is much too complex and the poor builder hasn’t acquired the skills needed.
For this third, intermediate kit, some previous knowledge is necessary in order to be successful. If you have already built the Model Expo Dory and Pram kits, you are well prepared.

⛵ You can find the latest version of the Model kit at:
Amazon:
https://amzn.to/4httGRm
Model Expo:
https://modelexpo-online.com/muscongu...

-- About The Musgongus Bay Lobster Smack Boat --
These boats were developed in the late 1800s for fishing and lobstering and were prevalent in Muscongus Bay, located on theEast Coast, north-east of Portland, Maine. They had sleek lines and were fast sailing with two wet tanks to hold their catch.

🛠️ -- Tools and Materials List –
Glues (Wood Glue and White Glue)
Sandpapers (100, 200, 400 and 600 grit)
Pencil
Ruler
Hobby Knife: https://s.click.aliexpress.com/e/_De5...
Mini Saw: https://s.click.aliexpress.com/e/_DCA...
Tweezers: https://s.click.aliexpress.com/e/_DCv...
Mini Clips
Paint (Acrylic Paint)
Brushes: https://s.click.aliexpress.com/e/_DEr...
Elastic Bands
Masking Tape
Mini Hand Drill
Small File Set
Side Cutter
Mini Round Nose Pliers
Small Pliers
Sewing Pins
Needle Threader
Protractor Set
Small Coping Saw
Small Bench Vise
Mini Binder Clips
Mini Hole Puncher
Folding Paper

-- Timestamps –
00:00 Intro
00:17 Unbox the Model Kit
00:41 Making the Boat
08:41 Mast and Spars
09:35 The Sails
11:45 Final Assembly
13:55 Finished Model

#beginnersguide #modelboat #shipmodel #woodenshipmodel #shipmodeling #shipmodelbuilding #shipmodelmaking