Replacing 63-82 Corvette Leaf Spring BUSHINGS

For the most part, C2 and C3 Corvettes share identical frames (for the most part), and this video may benefit those needing to replace the leaf spring bushings.

The job is not difficult, per se, but having a portable lift made my work much easier. It can also be done with a floor jack and jack stands.

The bushings on my 1976 Corvette had disintegrated, and that's not uncommon with polyurethane (or poly, for short). Rubber bushings deform over time but don't crumble like their poly counterparts.

I did use the rubber bushings I had recently removed from my 81 Corvette since they were in acceptable condition, but this was mostly a stopgap measure as I intend to completely remove the rear suspension on my 76 Vette so I can rebuild the trailing arms, the half-shafts, and much more.

I hope you find the video helpful if you need to replace your leaf spring link bushings.

Thank you for watching! 🙂👍🏻

======================================

📌 PRODUCTS USED IN THE VIDEO (Affiliate)

Evapo-Rust: https://amzn.to/3XlfK3e
Loctite Rust Neutralizer: https://amzn.to/3ToNYSu
Sil-Glyde Lube: https://amzn.to/4gsLYCC


🔗 CORVETTE LINKS (Affiliate)

🖤 Corvette Black Book https://amzn.to/4aupqhY

📚 C3 Corvette Books: https://amzn.to/4heST19
🔧 68-82 Corvette Manual: https://amzn.to/3QSDoRO
⚙️ C3 Corvette Restoration: https://amzn.to/41vyL5a

ℹ️ I earn a small commission from affiliate links, but products cost the same.


🛑 DISCLAIMER:

Although I enjoy working on Corvettes and some of my videos are instructional in nature, I am not responsible or liable if you choose to follow my advice on the subject.

I am a self-taught DIYer. If videos appear to give technical how-to advice, that is not my intention.

Working on a vehicle can be dangerous. If you're not confident, qualified, or lack the tools to do the job correctly and safely, hire a mechanic.


🔎 CONTENTS:

00:18 Replacing C3 Corvette Leaf Spring Bushings
01:52 Polyurethane Bushing Remnants
03:32 Installing Used Rubber Bushings
04:02 Removing the R.S. Poly Bushings
05:46 Drilling the Long (Lowering) Leaf Spring Bolts
08:22 Rust-Proofing Bushing Cups and Washers
12:11 Use the Right Lube on Rubber Bushings
13:27 Reinstalling the Leaf Spring Bushings
20:28 Reinstalling the Wheels


#c3corvette #bushings #polyurethane