PylonTech Pylon Battery connection to PC Console cable - BatteryView USB to RJ45 cable
Автор: mikeatyouttube
Загружено: 2023-02-01
Просмотров: 44164
Modified a standard Ethernet patch cable to allow direct connection between a PC and the Console port of a US3000C PylonTech battery. To allow monitoring of batteries and updating of firmware.
Software: Here's a link to the PylonTech BatteryView software
https://drive.google.com/file/d/1G2Nl...
And for the MultiSIBControl battery monitoring software - just search for MultiSIBControl.
The standard USB to RJ45 FTDI cable is not wired correctly for communication with the Pylontech batteries. Pylontech batteries use the RS232 transmit/receive and ground on RJ45 pin 3, pin 6 and pin 8. The USB to RJ45 FTDI cable has RX (receive) on pin 3, TX (transmit) on 6 and GND (ground) on pin 4. Only these three wires should be connected. For RS232, the TX wire at one end must be connected to the RX wire at the other.
Доступные форматы для скачивания:
Скачать видео mp4
-
Информация по загрузке:
