2011 Kawasaki Concours 14: Coolant Flush and Fill

You don’t have to do a full flush unless you suspect or observe rust, scale or lime in the coolant.
Otherwise a simple coolant change is recommended every 3 years or 24k miles - whichever comes first.
---------------------------------------------------------------------------------------------------------------------------------------------------------------
If you found any value in my videos, consider buying me a pizza:

https://buymeacoffee.com/cruisecontrol

Every bit helps and is deeply appreciated.
Thank you for being an amazing part of this community.
Your engagement and support keep me motivated, and I’m excited to bring you even more awesome content in the future.

Keep the shiny side up!
---------------------------------------------------------------------------------------------------------------------------------------------------------------
*IMPORTANT* Always allow the bike to cool before draining the system!

Prerequisites:
1) Place bike on center stand
2) Remove the Top, Middle and Bottom Fairings (Left & Right)

Tools I used:
Ratchet (3/8" Drive)
6” Extension (3/8” Drive)
10mm Socket (3/8" Drive)
Phillips Screwdriver
Small Bucket and Funnel
Non-permanent (Blue) Threadlock

Fluids:
Kawasaki Aluma Cool Prediluted Engine Coolant (Green) - about 3.4 L (3.6 US qt)
Prestone Total Cooling System Cleaner
2 Gallons Distilled Water

Torque Specs:
Coolant Reserve Tank Bolts: 3.9 Nm (35 in lbs)
Coolant Drain Plug: 12 Nm (106 in lbs)

Chapters:
00:00 - 1st Drain
03:08 - Flush Cleaner
04:54 - 2nd Drain
08:15 - 3rd Drain
10:30 - 4th Drain
12:07 - Coolant Fill

Music I Use: https://www.bensound.com/free-music-f...
License code: D8UPO4RAFKCM7WQI

**Disclaimer .aka Boring Legal Stuff**
The information provided in this video is for general informational purposes only. All information is provided in good faith, however I make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of this information. It is your responsibility to review and adhere to the official documentation provided by the manufacturer prior to performing any maintenance. I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user.