Easy and Fast E46 M3 Coolant Flush
Автор: Blue Purple Red
Загружено: 2013-08-17
Просмотров: 60395
This is a quick and easy coolant flush guide for the E46 M3. Instead of removing the lower radiator hose (which is very troublesome) I removed the temp sensor from the lower hose to open the system. I also went a step further and removed the engine block bolt to drain the coolant from the block. Once that was opened, I added water to the expansion take to flush out any remaining coolant. You want to perform this every 2 years to prevent corrision, blockages or damage to the engine or cooling system.
I did not jack up the car, but I did use a set of Rhino ramps, which can be found here. You should have a set. - http://amzn.to/14VR8hW
I used the following DIY's as a guide when I made this video:
http://blankowski.com/Cars/m3_coolant...
http://m3forum.net/m3forum/showthread...
http://www.m3forum.net/m3forum/showth...
Note: THE USE OF THIS DIY IS FOR YOUR REFERENCE ONLY. I DISCLAIM ALL LIABILITY FOR DIRECT, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OR INJURIES THAT RESULT FROM ANY USE OF THE EXAMPLES, INSTRUCTIONS OR OTHER INFORMATION IN THIS DIY.
Доступные форматы для скачивания:
Скачать видео mp4
-
Информация по загрузке:
![[Как слить охлаждающую жидкость] Двигатель Audi A5/Q6 3.2 л. Простая процедура своими руками](https://image.4k-video.ru/id-video/VAtm7-Pp0Y4)
