What is Data Center Infrastructure? – Data Center Fundamentals

Get a demo of our platform:
https://calendly.com/datacenterhawk/d...

–––––

0:00 - What is data center infrastructure?
1:27 - Data center exteriors
2:45 - Power infrastructure
6:04 - Physical security measures
9:45 - Cooling
16:40 - Connectivity
21:34 - Redundancy
26:30 - Power Usage Effectiveness

Continuing our Data Center Fundamentals series, we dive into data center infrastructure.

Electrical Infrastructure
Electricity travels along what’s called the power chain, which is how electricity gets from the utility provider all the way to the server inside the data center. A traditional power chain starts at the substation and eventually makes its way through a building transformer, a switching station, an uninterruptible power supply (UPS), a power distribution unit (PDU) and a remote power panel (RPP) before finally arriving at the racks and servers. Data centers also utilize on-site generators to power the facility if there is an interruption in the power supply from the substation.
Think of a data center like a giant laptop. The main power cord comes out of the wall and is then transformed into usable power for the laptop. Finally, if any of the components of the cord fail, the laptop has a battery to provide temporary power.

Mechanical Infrastructure
The amount of power a data center can consume is often limited by the amount of power consumption per rack that can be kept cool, typically referred to as density. In general, the average data center can cool at densities between 5-10 kW per rack, but some can go much higher.
The most common way to cool a data center involves blowing cool air up through a raised floor, which is pictured above. In this setup, racks are placed on a raised floor with removable tiles, usually three feet above the concrete slab floor. Cool air is fed underneath the raised floor and is forced up through perforated tiles in the floor around the racks. The warmer air coming out of the servers rises up and is pulled away from the data hall, run through cool-water chillers to cool it, and fed back beneath the raised floor to cool the servers again.
In certain climates, data centers can also take advantage of “free cooling” where they use the outside air to cool the servers. Instead of taking the hot air and cooling it to be used again, they allow the heat to escape and pull in the cool air from outside. This process is, as expected, much cheaper and energy efficient than operating more man made cooling infrastructure.

Connectivity Infrastructure
A data center’s connectivity infrastructure is also important. Without it, a data center would just be a building full of computers that can’t communicate with anyone outside the building.
As data centers are the primary foundation for activities happening online, the buildings themselves need to be highly connected. Access to a variety of fiber providers connects a data center to a wide network able to provide low latency connections and reach more customers.
Fiber traditionally runs into a data center through secured “vaults” and into the building’s meet-me-room or directly to a user’s servers. A meet-me-room is a location where fiber lines from different carriers can connect and exchange traffic.

Redundancy
Redundancy is communicated by the “need” or “N” plus the number of extra systems. The example above would be considered N+1. The data center needs 10 chillers and has one extra, thus it would be labeled as N+1. If the data center above had 10 extra generators in addition to the 10 they needed to operate, their redundancy would be double their need, or 2N.
In an N+1 scenario, a data center could lose one chiller and still operate because of the one extra chiller, but they would not have an extra available if a second chiller went down. In a 2N scenario, all of the operational chillers could break and the data center would enough to replace them all. Today, most data center providers find N+1 is sufficient to avoid downtime, though some industries require their data centers to be more redundant.
Redundancy applies to most aspects of a data center, including power supplies, generators, cooling infrastructure, and UPS systems. Some data centers have multiple power lines entering the building, or are fed from multiple substations to ensure uptime in the event a line is damaged somewhere. The same approach can be taken with fiber lines.
Data centers support the internet ecosystem that more and more of the world relies on today. As such, they require robust infrastructure to ensure there’s no interruption in the services they provide.

#datacenter #datacenterinfrastructure