2011-2017 BMW X3 F25 Engine oil and filter Replacement DIY

Tools and Parts Needed:

Engine oil (according to manufacturer specifications)
Oil filter
Oil filter wrench
Socket wrench set
Oil drain pan
Funnel
Oil filter removal tool (if necessary)
Gloves and safety glasses
Instructions:

Prepare the Vehicle:
Park the vehicle on a level surface and allow the engine to cool down for a few minutes.
Make sure you have all the necessary tools and replacement parts ready.
Locate the Oil Drain Plug and Filter:
The oil drain plug is typically located on the bottom of the engine oil pan.
The oil filter is usually located near the bottom of the engine, accessible from underneath the vehicle.
Drain the Engine Oil:
Place the oil drain pan beneath the oil drain plug.
Use a socket wrench to loosen the oil drain plug in a counterclockwise direction.
Once loosened, carefully remove the drain plug and allow the old oil to drain completely into the oil drain pan.
While the oil is draining, locate and remove the oil filter.
Replace the Oil Filter:
Use an oil filter wrench or a specific oil filter removal tool to loosen and remove the old oil filter.
Before installing the new oil filter, apply a thin layer of clean engine oil to the rubber gasket on the new filter.
Install the new oil filter by hand, tightening it until the gasket contacts the engine surface, then turn it an additional 3/4 to 1 full turn to secure it.
Add New Engine Oil:
Locate the oil filler cap on the top of the engine.
Using a funnel, pour the recommended amount of new engine oil into the engine. Refer to your vehicle's manual for the correct oil type and quantity.
Once the oil is added, securely tighten the oil filler cap.
Check Oil Level:
Start the engine and let it run for a few minutes to circulate the new oil.
Turn off the engine and wait a few minutes for the oil to settle.
Check the oil level using the dipstick, ensuring it falls within the recommended range.
Final Checks:
Inspect around the oil drain plug and oil filter for any leaks.
Dispose of the old oil and filter responsibly, following local regulations.
Record the date and mileage of the oil change for future reference.
Performing regular oil and filter changes is essential for maintaining the health and longevity of your engine. If you're not comfortable performing these tasks yourself, consider seeking assistance from a professional mechanic.

In this detailed DIY tutorial, we based on a 2011 BMW X3 equipped with a 3.0L gasoline engine and automatic transmission. This guide is applicable to BMW X3 models from 2011 to 2017 (F25 series).


For a detailed list of required tools and parts, and additional support, visit our website at youcanic.com.

Need More Help?
If you have any questions or need further assistance, don't hesitate to reach out through our website. At YOUCANIC, we provide comprehensive resources to help you with your vehicle maintenance needs.

Subscribe for More DIY Car Maintenance Videos!
Don't forget to like, comment, and subscribe for more step-by-step automotive repair tutorials. Happy wrenching!