Gt86/BRZ/FRS LED Smart Steering Wheel, Installing, Wiring, Safely, upgrade

in this video, we will be going over how to install a led smart steering wheel from start to finish.

IMPORTANT: the gt86 has no stable ground at the steering wheel, you must add a ground connection at the clock spring and wire it to the chassis. otherwise the led display will turn off as your steering left and right.( display restart when moving steering wheel)

what you need:

nitrate gloves
knife
10mm wrench
17 mm socket and ratchet
heat shrink and solder
philips screwdriver
small flat screwdriver
zip ties
patience and flexibility
Multimeter is good to have

tourque spec:
steering wheel 39nm

Customisation:
Steering wheel Password is 1234 as default

IMPORTANT:
Do not overtighten the small screws on steering wheel, they thread into aluminium and strip easily.

Music:
Epic Motivational Trap Beat | ENDGAME by Alex-Productions | https://onsound.eu/
Music promoted by https://www.free-stock-music.com
Creative Commons / Attribution 3.0 Unported License (CC BY 3.0)
https://creativecommons.org/licenses/...

Tech Success by Alex-Productions | https://onsound.eu/
Music promoted by https://www.free-stock-music.com
Creative Commons / Attribution 3.0 Unported License (CC BY 3.0)
https://creativecommons.org/licenses/...

The Way by LiQWYD | https://www.liqwydmusic.com
Music promoted by https://www.free-stock-music.com
Creative Commons / Attribution 3.0 Unported License (CC BY 3.0)
https://creativecommons.org/licenses/...

Voice of Earth by Alex-Productions | https://onsound.eu/
Music promoted by https://www.free-stock-music.com
Creative Commons / Attribution 3.0 Unported License (CC BY 3.0)
https://creativecommons.org/licenses/...

Legal: I am not responsible for your actions and take no responsibility if you mess up.
I try to advise to the best of my knowledge.