PGP9986 Water Tile: Defaulting

In this video, Dylan from Alarm Grid walks you through the step-by-step process to factory reset the PGP9986 and remove it from IQ Panel 4 programming. This can be helpful if you're having trouble enrolling the sensor, or you want to use it with a different panel.

00:00 - Intro
00:12 - Reasons to Default
01:00 - Default Sensor
02:41 - Delete Sensor
03:37 - Outro

The DSC PGP9986 is a PowerG+ flood and freeze sensor that works with both the IQ4 panels and the IQ Pro. For full compatibility, make sure your panel firmware is up-to-date — version 4.6.1 or higher for IQ4 panels, and version 4.4.1n or higher for the IQ Pro.

For more details and written instructions, check out our full FAQ here:​
https://www.alarmgrid.com/faq/how-do-...

🔔 Subscribe to our channel for more professional DIY alarm tutorials: http://bit.ly/3V93W3u

There are many reasons you might need to default your sensor:

Troubleshooting programming issues
Moving the sensor to a different panel
Resolving unusual behavior or false alerts

No matter the reason, the reset process is quick and simple - it only takes a few seconds to complete. If the Water Tile has been programmed with a panel, it should also be deleted from the panel either before or after the sensor default. Once that's been done, it's ready to program back into the panel, or with a different panel.

Some insurance companies may require flood and/or freeze protection. In some cases, having this protection and letting your insurance agent know can get you a discount on homeowner's insurance that quickly allows this investment to pay for itself. Check with your insurance agent today!

http://alrm.gd/get-monitored

#DIYAlarmSystem #alarmupgrade #alarmsystems #securitytech #insurancetips