Stinger Glider

Please visit www.TheAirPlaneGuy.org and Facebook: TheAirPlaneGuy.org

This is a kit from A2Z Corp. in the US called The Stinger. It is very suitable for beginners as you do not cut the wood out of long plank of balsa wood. The components were already laser-cut. You will need to briefly study the floor plan and get your tools ready. You will need 1-2 mats, sander or sand paper, super glue, an even table top, a block for support, patience and some skills. Within 30 minutes and you are done! In this video I will show you the suggested steps in its construction. The left and right sides of the main wing will need to be sanded. This step was not captured in the video. The goal is to build and fly a light glider that can float in the air by flying in circles. The Stinger is tuned to turn left. The turning radius can be increased by twisting the tail boom and holding it for 30 seconds. If it is the first time you do it, take it easy so that you will not break the tail. Very important. When you are good with the Stinger, you can then build other gliders esp. those come from floor plans and you will need to choose and cut the wood. Have fun! Thank you for watching.