DJI FPV + Naked Camera Like the GoPro Hero 10 Black Bones or GEPRC Hero 8 - How to Power and Mount!

How to get power to a naked camera on the DJI FPV Drone! Demo footage coming soon!
Items you will need:
A naked camera capable of being powered by 6S Voltage
Connector wire appropriate for your camera https://bit.ly/blackbonescable
XT30 or similar cable (male and female) https://amzn.to/3vwvoMA
1.5mm hex driver / wrench https://amzn.to/3kvHHCq
Soldering iron https://amzn.to/3F16Q1v
Flux pen https://amzn.to/3F0FOat
Rosin core solder https://amzn.to/38K4qs4
GoPro mount for DJI FPV https://bit.ly/djifpvmount

Timestamps:
0:00 Intro
0:34 Warning
0:49 Items Needed
2:10 Remove Canopy
2:57 Remove Heat Sync
4:55 Battery Warning
5:11 Clean With Rubbing Alcohol
5:42 Apply Flux
5:53 Pre-Tin Contacts
6:46 Pre-Tin Wires
7:18 Solder wires to ESC / PDB
8:06 Insulate Solder Joints
8:45 Reinstall Heat Sync
10:26 Reinstall Canopy
10:52 Install Mount
11:45 Measure Wire
12:45 Create Connection Cable
14:50 Final Connections
15:24 Testing
15:53 Conclusion

Some of the links above are affiliate links, we receive a small commission when you use them, thank you for your support!