How To Replace Fuser And Rollers For HP LaserJet 5si 8000 8100 8150 Printers

Instructions on how to replace/install HP 5si/8000 Maintenance Kit (C3971-69001) on the HP Laserjet 5si, 8000, 8100 and 8150 printers.
This video covers:
Replacing the fuser (including remove and re-installing the duplexer unit.)
Replacing the transfer roller.
Replacing the feed/separation rollers and pick up rollers in trays 2 and 3.
Replacing the feed/separation rollers and pick up rollers in 2000 page sheet feeder.
Resetting the maintenance message/page count.


HP LaserJet 8000/8100/8150 Code Reset Instructions
If the Perform User Maintenance message has been displayed:
1. Press the MENU button until the display reads CONFIGURATION MENU
2. Press the ITEM button until the display reads SERVICE MESSAGE = ON/OFF
3. Select OFF*
4. Press SELECT to save
5. Turn the printer off.
6. Press down the left side of the Item & Value buttons and turn on the printer.
7. Continue to press the buttons until RESETTING MAINTENANCE COUNT is displayed.
8. Release the buttons.

If the Perform User Maintenance has not been displayed:
1. Turn the printer off.
2. Press down the left side of the Item & Value buttons and turn on the printer.
3. Continue to press the buttons until RESETTING MAINTENANCE COUNT is displayed.
4. Release the buttons.

▶ SUBSCRIBE & HIT THE 🔔 http://bit.ly/SubRJTheBikeGuy

👍 And please give my video a thumbs up 👍

▶FACEBOOK.com/RJTheBikeGuy
  / rjthebikeguy  

▶TOOLS
http://www.rjthebikeguy.com/tools

▶SHIRTS
http://bit.ly/RJBikeGuyShirts

▶WEBPAGE
http://www.RJTheBikeGuy.com