How to Replace Rear Brakes 2002-2006 Honda CR-V

Shop TRQ on 1AAuto.com
Brake Pads https://trq.video/ib-1ABPS03158
Brake Rotor Set https://trq.video/ia-1APBR01132
Brake Pad & Rotor Kit https://trq.video/ia-1APBS07628
Shop TRQ on Amazon
Brake Pads https://www.amazon.com/dp/B081J2FPVS
Brake Rotor Set https://www.amazon.com/dp/B08HSP28N6
Brake Pad & Rotor Kit https://www.amazon.com/dp/B0CP3F7HKF

This video shows you how to install rear brake pads and rotors on your 2002-2006 Honda CR-V. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.

This repair was done on a 2002 Honda CR-V EX 2.4L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2002 Honda CR-V
2003 Honda CR-V
2004 Honda CR-V
2005 Honda CR-V
2006 Honda CR-V

Tools you will need:
• Pocket Screwdriver
• 14mm Socket
• 19mm Socket
• Brake Caliper Compressor Tool. Quad Piston. Ratchet Style. https://trq.video/oA-1AXAA00278
• 1/2 Inch Impact Gun
• 3/8 Inch Impact Gun
• Ratchet
• Torque Wrench https://trq.video/oBY-1AXAA00044
• Drill
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Liquid Thread Locker
• Paper Towels
• sanding disc
• Sandpaper
• Large Hammer
• Wire Brush https://trq.video/ofg-1AXAA00079

Subscribe:    / @trq  

Check out our playlist:
Honda CR-V 2002-2006 2nd Generation:    • Honda CR-V 2002-2006 2nd Generation  

📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.