Cheap & Easy DIY Van Plumbing System | Van Build Series Ep. 34

Today I'm going to walk you through, in great detail, how to plumb your van conversion.

I'm once again going into great detail for van conversion novices out there, like me, who have no prior building, and in this case, no plumbing background.

Please use the chapters below to jump to what you need as this is my longest video yet!

Enjoy and make sure to subscribe to follow along with my van build!

Chapters
0:00 Introduction
1:30 Over the wheel arch tank
3:36 Lay out all of your plumbing parts
9:20 Cut out holes in your tank
10:50 Install tank-side plumbing attachments
13:11 Install tank drain attachments
15:35 Install gravity feed hosing and attachments to your tank
17:50 Install pressure hose and attachments to your tank
20:00 Install hoses and attachments for your pump assembly
21:55 Install the water gauge sensor into your tank
25:30 Install plumbing joints onto the instant hot water heater
26:50 Put Teflon tape on all "straight" metal plumbing joints
29:55 Install water pump and accumulator tank
32:36 Install PEX and shark bite connectors
38:12 Measure and cut your 1/2" PEX pips
41:36 Attach PEX and shark bite connectors to your water tank and water heater
44:28 Install water tank drain/overflow hose to drain beneath your van
46:00 Mount your water tank




-------------Website-------------
https://www.vanlifedesigner.com
-------------Instagram-------------
  / vanlifedesigner  
-------------YouTube-------------
Subscribe: https://www.youtube.com/c/VanLifeDesi...



#vanbuild #vanlife #vanlifesolofemale