Professional 600/Pro 5 Plus KitchenAid Mixer Full Rebuild! Make Your 20 Year Old Mixer New Again!

Welcome back to Mr. Mixer! In today's video, we'll be going through a full rebuild of a professional style KitchenAid mixer. This includes changing out all of the internal gears, swapping out the motor and the speed control board, and installing a new planetary.

We go through this step by step and made it as easy to follow along with at home as we could. If your machine's starting to show it's years and needs a breath of new life a full rebuild is the best thing you could do to make sure it keeps running for years to come.

Disclaimer***
This kit is not compatible with the Epicurean model. The motor and upper and lower housings were manufactured differently so a new style motor will not fit into place properly. Secondarily the old motor has 8 teeth vs 10 in the new style also making the new worm gear not fit with the old motor**

Click here to check out the kit we put together!
https://www.mrmixer.store/store-2den3...

If you need any parts/upgrades/repairs on your mixer or are looking to pick one up, make sure to check out our site! We also accept mixers shipped in for repairs!

------------------------------------------------------
Mr. Mixer store: https://buff.ly/3xzUjlT
YouTube: https://buff.ly/44jDk3A
Facebook: https://buff.ly/3Jrx1kF
TikTok: https://buff.ly/4dalq7w...
Instagram: https://buff.ly/3JjfZ8z

0:00 Intro
0:30 Info on Mixer Models
1:33 Comfy Grip
2:21 Rebuild Kit Components
3:35 First Test Run
3:44 Tools You'll Need
3:58 Remove Beauty Band
4:12 Remove Upper Housing
4:54 Internal Components of the Mixer
5:24 Removing the Transmission Housing Screws
6:00 Start Removing Internal Gears
7:15 Remove Planetary
8:27 Remove the Speed Control Board
9:50 Remove Motor Screws
10:17 Inspecting the Arm Lift Assembly
10:42 Inspecting the Alignment Pins
11:45 Installing Bullet Proof Washers
12:43 Start Cleaning Old Grease
13:59 Inspecting the Worm Gear/Grease Bearings
15:01 Begin Reinstalling
15:13 Install New Motor
16:02 Install New Speed Control Board
16:49 Reconnect Wiring
18:21 Reconnect Hall Sensor
18:58 Start Regreasing
19:34 Regrease and Reseat Planetary
21:26 Reinstall Planetary Shaft
21:57 Reinstall Gears
24:14 Reassemble and Reinstall Worm Gear
26:59 Regrease Transmission Housing
27: 53 Install Gasket
28:29 Reinstall Transmission Housing
29:46 Reinstall Housing Cover
29:58 Reinstall Beauty Band
30:59 Installing Spring and Washer
32:22 Pat on the Back