DIY Surron Functional Brake Lights!

Sup guys, welcome back to the channel! The Surron comes stock with an "always ON" taillight, but I personally wanted a taillight that could also have an actual working brake light. So I ordered a taillight on amazon and wired up the brake lights using the stock brake sensors on the Surron. I also wired the taillight to turn ON/OFF with the headlight so I can turn it off in the day time when we're in the trails and such to save some battery.

I have a 2022 Surron Light Bee X, and I'm not sure if the wire colors vary between years but for power to the brake lights, I tapped into the red wire on the brake lever wires. You can double check the brake wires on your bike if you have a multimeter handy. One of those wires should have 0 volts when the brake lever isn't pressed, and 12.x volts when pressed. That's the wire you want to use.

If you've upgraded your brake system and you don't have the brake sensors anymore, you may want to check for a magnet sensor system, or for a full plug and play alternative, you can get the same kit Omar installed on his Surron that comes with brake lights, and front/reaer turn signals.
   • E-MX Surron Turn Signal & Working Brake Li...  

Tail light I ordered ($25):
https://www.amazon.com/gp/product/B09...


Thanks for watching guys, don't forget to like, comment, share, hit that😊 notification bell, and if you have't done so yet, SUBSCRIBE!!! 🤙🏼


Fortune Status merch available at www.fortunestatus.com
Thanks for all your support! 🙏🏼