How to Replace Front Brakes 2014-2018 GMC Sierra 1500

Buy Now!
New Brake Pads from 1AAuto.com https://trq.video/id-1ABPS02757

This video shows you how to install front brake pads and rotors on your 2014-2018 GMC Sierra 1500. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.

This repair was done on a 2015 GMC Sierra 1500 SLE 4.3L Crew Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2014 GMC Sierra 1500
2015 GMC Sierra 1500
2016 GMC Sierra 1500
2017 GMC Sierra 1500
2018 GMC Sierra 1500

Tools you will need:
• Flat Blade Screwdriver https://trq.video/oVC-1AXAA00013
• Pry Bar https://trq.video/ooz-1AXAA00020
• 19mm Wrench https://trq.video/opc-1AXAA00010
• 18mm Socket
• 19mm Socket
• Brake Caliper Compressor Tool. Quad Piston. Ratchet Style. https://trq.video/oB-1AXAA00278
• Pliers
• 3/8 Inch Impact Gun
• T30 Driver
• Socket Driver
• Swivel
• Torque Wrench https://trq.video/oDh-1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Liquid Thread Locker
• Rust Penetrant
• sanding disc
• Floor Jack https://trq.video/oqP-1AXAA00068
• Hammer
• Jack Stands https://trq.video/opg-1AXAA00065
• Wheel Chocks
• Wire Brush https://trq.video/ofw-1AXAA00079

Subscribe:    / @trq  

Check out our playlist:
GMC Sierra 1500 3rd Generation 2014-2018:    • GMC Sierra 1500 3rd Generation 2014-2018  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.