"Air-Acetylene" Proper Torch for Domestic, Home Refrigerators, NOT Oxy-Acetylene! Watch & learn why!

Air-Acetylene is proper torch for domestic refrigerator repair, NOT Oxy-Acetylene!
Stop using wrong torch that's 4000+ degrees too HOT, that's causing carbon buildup, so you have to flow nitrogen, YOU DON'T HAVE TO DO IF YOU USE PROPER TORCH AT PROPER TEMPERATURE, AIR-ACETYLENE!
Watch entire video & learn why! HVAC schools need to start making students aware size of tubing you're brazing, has everything to do with what torch you use!
Too many techs are learning Oxy-Acetylne is proper torch for all copper, IT'S NOT!
CAPILLARY, 1/4", 5/16" UP TO 3/8", YOU CAN'T USE OXY-ACETYLENE, IT'S WAY TOO HOT!
YOU'LL GET AWAY WITH IT, BUT YOU'RE CREATING SERIOUS ISSUES BY USING IT, AT 3000-6000 DEGS!
Air-Acetylene: 1400-1700 Degs, proper temp silver solder flows at & by using proper temp torch, you also don't incinerate flux, making it worthless & WORSE YOU'RE CAUSING BUILDUP OF CARBON INSIDE COPPER TUBING, SO YOU'RE MAKING MORE WORK, HAVING TO FLOW NITROGEN TO GET RID OF CARBON BUILDUP! YOU WON'T GET CARBON BUILDUP IF YOU USE PROPER TEMP TORCH, AIR-ACETYLENE W/TURBO TORCH TIP!

*CAPS ARE NOT YELLING, GEN Z & MILLENNIALS, THEY'RE FOR EMPHASIS & HAVE BEEN FOR 1000'S OF YEARS, CAPS WON'T HURT YOUR FEELINGS!

You don't have to lug all that equipment you DO NOT NEED, OXY-ACETYLENE CART, NITROGEN, ETC IF YOU USE AIR-ACETYLENE W/TURBO TORCH TIP, A-8/EQUIVALENT!

OXY-ACETYLENE IS USED FOR LARGER TUBING, 5/8", 7/8", 1" & LARGER...NOT SMALL TUBING WE HAVE W/DOMESTIC REFRIGERATORS!!

YOU'LL SAVE HOURS NOT HAVING TO FLOW NITROGEN, CARRYING IN ALL EQUIPMENT YOU DON'T NEED, CLEANING SOOT YOU CAUSED ON CEILING!
STOP USING WRONG TORCH/EQUIPMENT!

AIR-ACETYLENE YOU DON'T HAVE TO ADJUST, YOU TURN ON VALVE ON HANDLE, LIGHT IT, THAT'S IT, IT'S READY TO BRAZE!
THE BRAZING IS EXTREMELY SMOOTH! YES IT GETS TO RIGHT TEMP & IS HOT ENOUGH, DEPENDS ON TIP YOU USE!
A-8 TIP IS PERFECT TEMP W/TURBO TORCH HANDLE.
I USE MC TANK, SMALLEST & IT LASTS A YEAR USUALLY, NO BUYING OXYGEN CONSTANTLY, AT ALL, NO CONSTANT BUYING NITROGEN, BECAUSE YOU'RE NOT FLOWING IT, THERE'S NO CARBON BUILDUP AT 1400-1700 DEGS W/AIR-ACETYLENE TORCH SETUP!

WATCH VIDEO/LEARN PROPER WAY TO DO JOB PROPERLY & AVOID HOURS OF WASTED TIME, BECAUSE YOU'VE LEARNED THE WRONG WAY FOR DOMESTIC REFRIGERATORS!

YOU'LL LOVE IT/THANK ME FOR HUGE SAVINGS, HOURS QUICKER GETTING SEALED SYSTEM REPAIRS DONE, THAN W/STUPID BULKY OXY-ACETYLENE SETUP!

TURBO TORCH HANDLE, TIP, HOSE & REGULATOR: NEW FOR ABOUT $150-$200 & MC ACETYLENE TANK ABOUT $40! THAT'S IT, INSTEAD OF A THOUSAND & OXYGEN/NITROGEN COSTS &WASTED HOURS DUE TO CARBON BUILDUP, USING A TORCH THAT'S 4000 DEGS HOTTER THAN IT SHOULD BE!
I'M NOT GUESSING, IT'S 40+ YEARS OF EXPERIENCE DOING SYSTEMS W/PROPER TORCH, AIR-ACETYLENE, BECAUSE I WAS TAUGHT PROPERLY BY FACTORY!!

CHECK IT OUT, TRY IT, YOU'LL FALL IN LOVE & MAKE MUCH MORE MONEY YOU WERE WASTING BEFORE!

MICHAEL C RILEY
EMAIL: [email protected]

I LOVE CAPS!
I HATE SNOWFLAKES!
OHHHHH.....and I won't apologize for being so tough/brutal on bad Millennials/Gen z's that aren't doing things right. It's NOT everyone, but too many are doing things wrong, costing more money/time, a total waste!

2CFM Vacuum pump: $46.xx!
https://www.ebay.com/itm/273145289418...

Turbo Torch Kit(MC tank):
New: $140
https://www.ebay.com/itm/202772207884...

"MC" Tank
https://www.airgas.com/product/Gases/...

Stay-Silv Flux:
https://www.ebay.com/itm/224534662334

Sil-foss 15%:
https://www.ebay.com/itm/261340496847...