Cleaning 4th generation gas injectors (OMVL REG)

Cleaning 4th generation gas injectors (OMVL REG) is necessary if your car begins to twitch when switching to gas. This indicates clogged gas injectors and a lean gas-air mixture. There is not enough gas for normal engine operation.
OMVL gas injectors are cleaned in the following order:
First, you need to remove the top bar, simply grab the edge with your hand and pull it gently up;
Remove the electromagnetic coils from the gas valve body;
Then you need to unscrew 5 screws and carefully remove the metal plate;
We inspect gas valve springs and rubber gaskets. If necessary, they need to be replaced;
Using compressed air and carburetor cleaner, we blow and wash the gas injectors;
Putting everything back together in reverse order;
After disassembly and cleaning, in case of increased gas consumption, computer calibration of gas injectors will be required.
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
Video sections (chapters):
0:00 Introduction
0:23 Disassembling OMVL gas injectors
1:51 Checking the springs of OMVL gas injectors
2:14 Cleaning the gas injector housing
2:54 Cleaning OMVL gas injector valves
3:11 Assembling OMVL gas injectors
4:49 Installing gas injectors on the engine
5:09 Conclusion
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
And in this video I will show how to replace a gas valve (Tomasetto reducer)    • Замена газового клапана (редуктор Tom...  
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
Subscribe to our channel and watch videos on this topic #cleaninggasinjectors, #gasinjectors, #cleaninginjectors, #omvlreg.
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
Our social media channel following the links:
Facebook -   / 1147375328749226  
Instagram - https://www.instagram.com/delo__maste...
Telegram - t.me/delo_mastera_boitsa
Odnoklassniki - https://ok.ru/delomasteraboitsa
VKontakte - https://vk.com/club141674316
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
Thank you very much for your support friends 💕